72205LB25TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72205LB25TF Overview
The TQFP package contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .A supply voltage of 5V allows for high efficiency.A total of 64 terminations are contained within FIFO means.Operation pins are 64 .For its operation, 60mA is the maximum current required.In order to maximize efficiency, the supply voltage should be set to 5V .During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.As a result, it contains a total of 64 pins.When the frequency is set to 40MHz it can maintain good accuracy.40MHz is the FIFO memory IC's maximum value for regular operation.Normaly, the component is powered by 5V power supplies.
72205LB25TF Features
FIFOs category
Frequency at most
72205LB25TF Applications
There are a lot of Integrated Device Technology (IDT) 72205LB25TF FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- Microprogramming
- Rate buffers
- Firmware loaders
- Game Consoles
- Data communications
- Tape controllers
- Optical memories
- MP3 Interface for Automobile
- Queues for communication systems
