72205LB25TF8
| Parameters | |
|---|---|
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
72205LB25TF8 Overview
You can find FIFO memory chip in the LQFP package.It's packaged in the shape of a Tape & Reel .Memory IC's recommended mounted way is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.FIFO consists of 64 terminations, which indicates that FIFO means is empty.FIFO design has 64 operation pins.FIFO design requires 60mA amps of current to operate.In order to maximize efficiency, the supply voltage should be set to 5V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is of the type OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.The FIFO memory IC is equipped with a total of 64 pins.When the frequency is set to 40MHz , the system can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 40MHz .The component normally owns 5V power supplies.
72205LB25TF8 Features
FIFOs category
Frequency at most
72205LB25TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72205LB25TF8 FIFOs Memory applications.
- Analog-to-digital converters
- Wireless
- Optical memories
- GPS Offender Tracking
- Down-Hole Energy Drilling
- Cardiac Monitoring Device
- Controlled baseline
- Rate buffers
- Communications
- Programmable Logic Controller
