72205LB25TFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72205LB25TFI8 Overview
This package is included in LQFP .In this case, it is packaged in case number Tape & Reel .Mounting it Surface Mount is recommended.A supply voltage of 5V is capable of producing high efficiency.The number of terminations in FIFO means is 64 .In the case of the operation pins, they are 64 pins.In order to operate FIFO design, a maximum current of 60mA is required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .In this part, the memory type is OTHER FIFO .If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.FIFO memory can handle a maximum supply voltage of 5.5V V.It has a total of 64 pins on it.It is capable of maintaining good accuracy with a frequency of 40MHz .It is recommended that the FIFO memory's maximum value be set to 40MHz .It is normal for the component to own 5V power supplies.
72205LB25TFI8 Features
FIFOs category
Frequency at most
72205LB25TFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72205LB25TFI8 FIFOs Memory applications.
- Communications Systems
- Programmable Logic Controller
- Look-up Tables
- Medical Monitoring Device
- A/D output buffers
- One assembly
- Consumer
- Microprogramming
- IP Camera Buffer
- Networking
