72210L15TP
| Parameters | |
|---|---|
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 66.7MHz |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X8 |
| Density | 4 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 8b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
72210L15TP Overview
FIFO memory chip is included in the PDIP package.Memory IC's recommended mounted way is Through Hole .With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains 28 terminations.28 pin is used for operation.FIFO design requires a maximum current of 40mA to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.This FIFO memory IC is equipped with 28 pins in total.With a frequency of 66.7MHz , it exhibits good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.Normally, the component owns 5V power supplies.
72210L15TP Features
FIFOs category
Frequency at most
72210L15TP Applications
There are a lot of Integrated Device Technology (IDT) 72210L15TP FIFOs Memory applications.
- Laser Receiver System
- Medical Monitoring Device
- Consumer Systems
- Magnetic memories
- Smart Meter
- Switches
- IP Radio
- Networking
- High-speed disk
- Tape controllers
