72210L25TP
| Parameters | |
|---|---|
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 40MHz |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 512X8 |
| Density | 4 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 8b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
72210L25TP Overview
You can find FIFO memory chip in package PDIP .It comes in a Bulk package.Mounting it Through Hole is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .A total of 28 terminations are contained within FIFO means.These are the 28 pins for operation.FIFO design requires 40mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.In FIFOs , there is a self-contained gadget.This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at very low supply voltages, such as 4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.Approximately 28 pins are attached to it.It is capable of maintaining good accuracy with a frequency of 40MHz .The memory logic's maximum value is 40MHz for regular operation.Components normally possess 5V power supplies.
72210L25TP Features
FIFOs category
Frequency at most
72210L25TP Applications
There are a lot of Integrated Device Technology (IDT) 72210L25TP FIFOs Memory applications.
- Seismic Data Collection at Extreme Temperatures
- Magnetic memories
- Medical Monitoring Device
- Rate buffers
- General Data Collection Applications at Low-Temperatures
- Communications Systems
- Consumer
- Battery Charger
- Video Processing
- Notebook
