72211L10J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72211L10J8 Overview
FIFO memory chip is contained in the PLCC package.It is pointing in the direction of Surface Mount .When the supply voltage is 5V , high efficiency is possible.In FIFO means, there are 32 terminations.Operation pins are 32 .In order to operate FIFO design, a maximum current of 35mA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained in FIFOs .A OTHER FIFO memory type IC is used in the part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.There are a total of 32 pins on this board.It is capable of maintaining good accuracy with a frequency of 100MHz .During regular operation, the FIFO memory's maximum value is 100MHz .In normal circumstances, the component has 5V power supplies.
72211L10J8 Features
FIFOs category
Frequency at most
72211L10J8 Applications
There are a lot of Integrated Device Technology (IDT) 72211L10J8 FIFOs Memory applications.
- Video
- Digital buffering
- Communications
- Smart Meter
- Analog-to-digital converters
- IP Radio
- Transistors
- Network switching/routing
- Product traceability
- Cardiac Monitoring Device
