72211L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72211L10PF Overview
FIFO memory chip is included in the TQFP package.It is pointing in the direction of Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 32 terminations.The operation pins are 32 pins.In order for FIFO design to operate, a maximum current of 35mA is required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is contained within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.A total of 32 pins are present on the FIFO memory IC.In the presence of a 100MHz frequency, it can maintain good accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.There are normally 5V power supplies attached to the component.
72211L10PF Features
FIFOs category
Frequency at most
72211L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72211L10PF FIFOs Memory applications.
- SPI Bus Flash Memory Devices
- General Data Collection Applications at Low-Temperatures
- Code converters
- Thermal Management for DDR3 Memory Modules
- Telecommunication
- Tape controllers
- Desktop Computers
- Digital buffering
- Smart Meter
- Wireless
