72211L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72211L10PFG Overview
You can find FIFO memory chip in package TQFP .It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V , high efficiency is possible.A total of 32 terminations are contained within FIFO means.32 pins are the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.The gadget in FIFOs is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.A total of 32 pins are present on the FIFO memory IC.A frequency of 100MHz is sufficient to maintain good accuracy.During regular operation, the FIFO memory's maximum value is 100MHz .It is normal for the component to own 5V power supplies.
72211L10PFG Features
FIFOs category
Frequency at most
72211L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72211L10PFG FIFOs Memory applications.
- Look-up Tables
- Data-acquisition systems
- Wireless
- SPI Bus Flash Memory Devices
- One assembly
- IP Camera Buffer
- Event Recorder
- Temporary storage elements
- SPI Bus Flash Memory Device
- Notebook
