72211L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72211L10PFG8 Overview
You will find FIFO memory chip in the TQFP package.Memory IC's recommended mounted way is Surface Mount .High efficiency is possible with a supply voltage of 5V .In FIFO means, there are 32 terminations.32 pins are the operation pins.FIFO design requires a maximum current of 35mA to operate.A supply voltage of 5V is recommended for FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , there is a self-contained gadget.This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.There are a total of 32 pins on this board.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.The memory logic's maximum value is 100MHz for regular operation.The component normally owns 5V power supplies.
72211L10PFG8 Features
FIFOs category
Frequency at most
72211L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72211L10PFG8 FIFOs Memory applications.
- Telecommunication
- A/D output buffers
- Application that requires re-writable nonvolatile parameter memory
- Consumer
- Data-acquisition systems
- Buses
- Desktop Computers
- Computers
- HDD
- Computer Systems
