72211L15JI
| Parameters | |
|---|---|
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
72211L15JI Overview
You will find FIFO memory chip in the PLCC package.A Surface Mount mounting method is recommended.Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 32 terminations.32 pins are used for operation.There is a maximum current requirement of 35mA for its operation.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.In FIFOs , this gadget is self-contained.A OTHER FIFO memory type IC is used in the part.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 32 pins on this FIFO memory IC.In the presence of a 66.7MHz frequency, it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .There are normally 5V power supplies attached to the component.
72211L15JI Features
FIFOs category
Frequency at most
72211L15JI Applications
There are a lot of Integrated Device Technology (IDT) 72211L15JI FIFOs Memory applications.
- MP3 Interface for Automobile
- Microprogramming
- Battery Charger
- Analog-to-digital converters
- Optical memories
- Computer Systems
- Multi-stage synchronizer
- Address mapping
- Cameras
- Down-Hole Energy Drilling
