72211L15JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72211L15JI8 Overview
You can find FIFO memory chip in the PLCC package.There's a Tape & Reel on the package.Mounting it in Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.The number of terminations in FIFO means is 32 .32 pins are the operation pins.FIFO design requires a maximum current of 35mA to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.It is self-contained in FIFOs .This part has a memory type of OTHER FIFO .Low supply voltages, such as 4.5V V, may be required for operation.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.There are a total of 32 pins on this FIFO memory IC.It maintains good accuracy at a 66.7MHz frequency.During normal operation, the FIFO memory's maximum value is 66.7MHz .Normally, the component owns 5V power supplies.
72211L15JI8 Features
FIFOs category
Frequency at most
72211L15JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72211L15JI8 FIFOs Memory applications.
- Analog-to-digital converters
- PC peripheral
- SPI Bus Flash Memory Device
- Event Recorder
- Communications
- General Data Collection Applications at Extreme High-Temperatures
- Notebook
- Desktop Computers
- Emulators
- Alarm System
