banner_page

72211L15PF

32 Terminations5V 32 Pin FIFO memory IC10 ns Min 4.5V VMax 5.5V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-72211L15PF
  • Package: TQFP
  • Datasheet: PDF
  • Stock: 796
  • Description: 32 Terminations5V 32 Pin FIFO memory IC10 ns Min 4.5V VMax 5.5V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Lead, Tin
Mount Surface Mount
Package / Case TQFP
Number of Pins 32
Published 2008
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 32
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Subcategory FIFOs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.8mm
Frequency 66.7MHz
Pin Count 32
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Element Configuration Dual
Nominal Supply Current 35mA
Max Supply Current 35mA
Frequency (Max) 66.7MHz
Access Time 10 ns
Organization 512X9
Density 4.5 kb
Standby Current-Max 0.08A
Parallel/Serial PARALLEL
Sync/Async Synchronous
Word Size 9b
Memory IC Type OTHER FIFO
Bus Directional Unidirectional
FWFT Support No
Programmable Flags Support Yes
Output Enable YES
Cycle Time 15 ns
Height Seated (Max) 1.6mm
Length 7mm
Width 7mm
Thickness 1.4mm
RoHS Status RoHS Compliant
Lead Free Contains Lead

72211L15PF Overview


You can find FIFO memory chip in the TQFP package.It is pointing in the direction of Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.The number of terminations in FIFO means is 32 .The operation pins are 32 pins.In order to operate FIFO design, a maximum current of 35mA is required.A voltage of 5V should be used for FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.FIFO may operate at a very low supply voltage, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.This FIFO memory IC is equipped with 32 pins in total.In the presence of a 66.7MHz frequency, it can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 66.7MHz .Components normally possess 5V power supplies.

72211L15PF Features


FIFOs category
Frequency at most

72211L15PF Applications


There are a lot of Integrated Device Technology (IDT) 72211L15PF FIFOs Memory applications.

  • Smart Meter
  • Code converters
  • Test site
  • Microprogramming
  • Event Recorder
  • Consumer Systems
  • Communications Systems
  • Queues for communication systems
  • Computers
  • Controlled baseline

Write a review

Note: HTML is not translated!
    Bad           Good