72211L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.08A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72211L15PF8 Overview
The TQFP package contains FIFO memory chip.Mounting it in the Surface Mount way is recommended.A supply voltage of 5V is capable of producing high efficiency.A total of 32 terminations can be found in FIFO means.FIFO design has 32 operation pins.The maximum current required for its operation is 35mA .The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.Its maximum operating temperature of 70°C °C ensures stable operation.A self-contained gadget is contained in FIFOs .This part has a memory type of OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.As a result, it contains a total of 32 pins.When the frequency is set to 66.7MHz , the system can maintain good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.It is normal for a component to be equipped with 5V power supplies.
72211L15PF8 Features
FIFOs category
Frequency at most
72211L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72211L15PF8 FIFOs Memory applications.
- Code converters
- Network bridges
- Queues for communication systems
- Down-Hole Energy Drilling
- IP Radio
- Data
- Look-up Tables
- Routers
- A/D output buffers
- Magnetic memories
