Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
32 |
Published |
2008 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.8mm |
Frequency |
66.7MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
32 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
35mA |
Max Supply Current |
35mA |
Frequency (Max) |
66.7MHz |
Access Time |
10 ns |
Organization |
512X9 |
Density |
4.5 kb |
Standby Current-Max |
0.005A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
FWFT Support |
No |
Programmable Flags Support |
Yes |
Output Enable |
YES |
Cycle Time |
15 ns |
Height Seated (Max) |
1.6mm |
Length |
7mm |
Width |
7mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
72211L15PFGI Overview
FIFO memory chip is contained in the TQFP package.It is pointing in the direction of Surface Mount .An input voltage of 5V results in high efficiency.I found that it has 32 terminations in FIFO means.There are 32 pins on the operation pins.In order for FIFO design to operate, a maximum current of 35mA is required.A supply voltage of 5V is recommended for FIFO's maximum efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.This gadget is self-contained in?FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.The FIFO memory IC has a total of 32 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .Normally, the component owns 5V power supplies.
72211L15PFGI Features
FIFOs category
Frequency at most
72211L15PFGI Applications
There are a lot of Integrated Device Technology (IDT) 72211L15PFGI FIFOs Memory applications.
- Network switching/routing
- Video
- Consumer Systems
- IP Radio
- Video time base correction
- Computer Systems
- Code converters
- High-speed graphics pixel buffer
- Cameras
- Switches