72211L15PFGI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72211L15PFGI8 Overview
TQFP is a package that contains FIFO memory chip.Tape & Reel case is used for packaging.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V there is the possibility of high efficiency.As a result of this, FIFO means contains 32 terminations.These are the 32 pins for operation.FIFO requires a minimum of 35mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained within FIFOs .The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.There are a total of 32 pins on this board.A frequency of 66.7MHz is sufficient to maintain good accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.Normally, the component owns 5V power supplies.
72211L15PFGI8 Features
FIFOs category
Frequency at most
72211L15PFGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72211L15PFGI8 FIFOs Memory applications.
- IP Camera Buffer
- Game Consoles
- Alarm System
- Emulators
- Disk Controllers
- Queues for communication systems
- Communications Systems
- Multimedia
- Programmable Logic Controller
- PC peripheral
