72211L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72211L15PFI8 Overview
You can find FIFO memory chip in package TQFP .It comes in a Tape & Reel package.Surface Mount is memory IC's recommended mounting method.When the supply voltage is 5V there is the possibility of high efficiency.A total of 32 terminations can be found in FIFO means.32 pins are used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .A supply voltage of 5V is recommended for FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.This gadget is self-contained in?FIFOs .A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.There are a total of 32 pins on this FIFO memory IC.A frequency of 66.7MHz is capable of maintaining good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.The component normally owns 5V power supplies.
72211L15PFI8 Features
FIFOs category
Frequency at most
72211L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72211L15PFI8 FIFOs Memory applications.
- Multimedia
- SPI Bus Flash Memory Devices
- GPS Offender Tracking
- Consumer
- Emulators
- Routers
- Programmable Logic Controller
- IP Camera Buffer
- General Data Collection Applications at Low-Temperatures
- Test Equipment
