72211L25J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.08A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72211L25J Overview
FIFO memory chip is included in the PLCC package.The recommended mounting way is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.The number of terminations in FIFO means is 32 .32 pins are the operation pins.FIFO design requires a maximum current of 35mA to operate.A supply voltage of 5V is recommended for FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained in FIFOs .It has a OTHER FIFO memory type IC.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.There are a total of 32 pins on this FIFO memory IC.In spite of the frequency 40MHz , it is capable of maintaining a good level of accuracy.It is recommended that the FIFO memory's maximum value be set to 40MHz .In normal circumstances, the component has 5V power supplies.
72211L25J Features
FIFOs category
Frequency at most
72211L25J Applications
There are a lot of Integrated Device Technology (IDT) 72211L25J FIFOs Memory applications.
- SPD for DDR3 Memory Modules
- Seismic Data Collection at Extreme Temperatures
- Wireless
- Video
- MP3 Interface for Automobile
- High-speed graphics pixel buffer
- Telecommunication
- Multi-stage synchronizer
- Extended product life cycle
- TVs
