72211L25JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72211L25JI8 Overview
FIFO memory chip can be found in the PLCC package.Tape & Reel case is used for packaging.Mounting it in the Surface Mount way is recommended.When the supply voltage is 5V there is the possibility of high efficiency.As a result of this, FIFO means contains 32 terminations.There are 32 pins on the operation pins.In order to operate it, it requires 35mA volts of current.A supply voltage of 5V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.It is contained within FIFOs .This part has a memory type of OTHER FIFO .If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.It consists of a total of 32 pins.It is capable of maintaining good accuracy with a frequency of 40MHz .A FIFO memory's maximum value of 40MHz can be used for regular operation.It is normal for the component to own 5V power supplies.
72211L25JI8 Features
FIFOs category
Frequency at most
72211L25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72211L25JI8 FIFOs Memory applications.
- Computers
- Temporary storage elements
- Look-up Tables
- GPS Offender Tracking
- Data-acquisition systems
- Event Recorder
- General Data Collection Applications at Extreme High-Temperatures
- Transistors
- Medical Monitoring Device
- Signal processing
