72211L25PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.08A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72211L25PF8 Overview
FIFO memory chip is contained in the TQFP package.Mounting it in Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.The number of terminations in FIFO means is 32 .In the case of the operation pins, they are 32 pins.FIFO design requires a maximum current of 35mA to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.The gadget is self-contained and can be found in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.Approximately 32 pins are attached to it.It is capable of maintaining good accuracy with a frequency of 40MHz .Regular operation has a FIFO memory's maximum value of 40MHz .Normally, 5V power supplies are owned by the component.
72211L25PF8 Features
FIFOs category
Frequency at most
72211L25PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72211L25PF8 FIFOs Memory applications.
- Video
- Analog-to-digital converters
- Buses
- Rate buffers
- Portable Information Devices
- Product traceability
- Programmable Logic Controller
- General Data Collection Applications at Extreme High-Temperatures
- A/D output buffers
- Code converters
