72211L25PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72211L25PFI8 Overview
FIFO memory chip is contained in the TQFP package.In this case, it is packaged in case number Tape & Reel .Surface Mount is memory IC's recommended mounting method.A supply voltage of 5V allows for high efficiency.The number of terminations in FIFO means is 32 .32 pin is used for operation.FIFO design requires a maximum current of 35mA to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .Keeping the temperature at -40°C degrees Celsius ensures its reliability.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.The gadget in FIFOs is self-contained.There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.There are a total of 32 pins on this board.With a frequency of 40MHz , it maintains good accuracy.During normal operation, the FIFO memory's maximum value is 40MHz .Normaly, the component is powered by 5V power supplies.
72211L25PFI8 Features
FIFOs category
Frequency at most
72211L25PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72211L25PFI8 FIFOs Memory applications.
- Microprogramming
- Network bridges
- Rate buffers
- Look-up Tables
- A/D output buffers
- Test site
- Digital buffering
- Notebook
- Code converters
- Smart Meter
