72215LB10J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72215LB10J8 Overview
PLCC is the package in which FIFO memory chip is contained.The recommended mounting method for this FIFO products is Surface Mount .High efficiency is possible with a supply voltage of 5V .FIFO means contains a total of 68 terminations.As far as the operation pins are concerned, they are 68 pins.FIFO design requires 60mA amps of current to operate.A supply voltage of 5V is recommended for FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget in FIFOs is self-contained.The IC of the part is of the type OTHER FIFO .FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.It consists of a total of 68 pins.With a frequency of 100MHz , it maintains good accuracy.The memory logic's maximum value is 100MHz for regular operation.Normally, the component owns 5V power supplies.
72215LB10J8 Features
FIFOs category
Frequency at most
72215LB10J8 Applications
There are a lot of Integrated Device Technology (IDT) 72215LB10J8 FIFOs Memory applications.
- Down-Hole Energy Drilling
- Programmable Logic Controller
- Networking
- SPD for DDR3 Memory Modules
- SPI Bus Flash Memory Devices
- Video
- Wireless
- Video time base correction
- Look-up Tables
- GPS Offender Tracking
