72215LB10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72215LB10PF8 Overview
The TQFP package contains FIFO memory chip.In this case, it is packaged in case number Tape & Reel .A Surface Mount mounting method is recommended.A supply voltage of 5V is capable of producing high efficiency.64 terminations are contained in FIFO means.64 pins are used for operation.In order to operate it, it requires 60mA volts of current.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.70°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , there is a self-contained gadget.A OTHER FIFO memory type IC is used in the part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.There are a total of 64 pins on this board.A frequency of 100MHz is capable of maintaining good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .Components normally possess 5V power supplies.
72215LB10PF8 Features
FIFOs category
Frequency at most
72215LB10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72215LB10PF8 FIFOs Memory applications.
- Queues for communication systems
- Fabrication Site
- Magnetic memories
- Application that requires re-writable nonvolatile parameter memory
- Look-up Tables
- Communications
- Laser Receiver System
- PC peripheral
- Consumer
- Consumer Systems
