72215LB10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72215LB10PFG Overview
FIFO memory chip is included in the TQFP package.It is pointing in the direction of Surface Mount .With a supply voltage of 5V volts, high efficiency is possible.I found that it has 64 terminations in FIFO means.As far as the operation pins are concerned, they are 64 pins.For its operation, 60mA is the maximum current required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.Currently, it has 64 pins.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.It is normal for the component to own 5V power supplies.
72215LB10PFG Features
FIFOs category
Frequency at most
72215LB10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72215LB10PFG FIFOs Memory applications.
- SPD for DDR3 Memory Modules
- Application that requires re-writable nonvolatile parameter memory
- Video
- SPI Bus Flash Memory Devices
- PC peripheral
- Queues for communication systems
- Extended product life cycle
- Measurement Equipment
- Firmware loaders
- Video time base correction
