72215LB10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X18 |
| Standby Current-Max | 0.005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72215LB10PFG8 Overview
You can find FIFO memory chip in the LQFP package.It's packaged in the shape of a Tape & Reel .Memory IC's recommended mounted way is Surface Mount .High efficiency is possible with a supply voltage of 5V .As a result of this, FIFO means contains 64 terminations.In the case of the operation pins, they are 64 pins.FIFO design requires a maximum current of 60mA to operate.In order to maximize efficiency, the supply voltage should be set to 5V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.It is self-contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.Approximately 64 pins are attached to it.Normally, the FIFO memory's maximum value is 100MHz .A component normally has 5V power supplies attached to it.
72215LB10PFG8 Features
FIFOs category
Frequency at most
72215LB10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72215LB10PFG8 FIFOs Memory applications.
- Down-Hole Energy Drilling
- Buses
- TVs
- Character generators
- Programmable Logic Controller
- Multi-stage synchronizer
- Communications
- A/D output buffers
- Communications Systems
- Video
