72215LB10TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72215LB10TF8 Overview
This package is included in TQFP .Mounting it in the Surface Mount way is recommended.A supply voltage of 5V is capable of producing high efficiency.A total of 64 terminations are contained within FIFO means.In the case of the operation pins, they are 64 pins.There is a maximum current requirement of 60mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 5V .FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.There is a self-contained gadget within FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.The FIFO memory IC is equipped with a total of 64 pins.A frequency of 100MHz is capable of maintaining good accuracy.During regular operation, the FIFO memory's maximum value is 100MHz .Normally, the component owns 5V power supplies.
72215LB10TF8 Features
FIFOs category
Frequency at most
72215LB10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72215LB10TF8 FIFOs Memory applications.
- Alarm System
- Portable Information Devices
- SPI Bus Flash Memory Devices
- Character generators
- Down-Hole Energy Drilling
- Portable Information Devices
- High-speed graphics pixel buffer
- TVs
- Multi-stage synchronizer
- IP Camera Buffer
