72215LB15J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 66.7MHz |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Direction | Unidirectional |
| Density | 9 kb |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72215LB15J Overview
This package is included in PLCC .Mounting it Surface Mount is recommended.Operation pins are 68 .FIFO design requires 60mA amps of current to operate.In order to maximize efficiency, the supply voltage should be set to 5V .During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.It is capable of maintaining good accuracy with a frequency of 66.7MHz .It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72215LB15J Features
Frequency at most
72215LB15J Applications
There are a lot of Integrated Device Technology (IDT) 72215LB15J FIFOs Memory applications.
- High-speed graphics pixel buffer
- Consumer
- Address mapping
- Data-acquisition systems
- Communications Systems
- Network switching/routing
- Desktop Computers
- Portable Information Devices
- Signal processing
- General Data Collection Applications at Low-Temperatures
