banner_page

72215LB15PF

64 Terminations5V 64 Pin FIFO memory IC10 ns Min 4.5V VMax 5.5V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-72215LB15PF
  • Package: TQFP
  • Datasheet: PDF
  • Stock: 352
  • Description: 64 Terminations5V 64 Pin FIFO memory IC10 ns Min 4.5V VMax 5.5V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Lead, Tin
Mount Surface Mount
Package / Case TQFP
Number of Pins 64
Published 2000
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 64
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
HTS Code 8542.32.00.71
Subcategory FIFOs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.8mm
Frequency 66.7MHz
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 64
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Element Configuration Dual
Nominal Supply Current 60mA
Max Supply Current 60mA
Frequency (Max) 66.7MHz
Access Time 10 ns
Organization 512X18
Density 9 kb
Standby Current-Max 0.005A
Parallel/Serial PARALLEL
Sync/Async Synchronous
Word Size 18b
Memory IC Type OTHER FIFO
Bus Directional Unidirectional
FWFT Support No
Programmable Flags Support Yes
Output Enable YES
Cycle Time 15 ns
Height Seated (Max) 1.6mm
Length 14mm
Width 14mm
Thickness 1.4mm
RoHS Status RoHS Compliant
Lead Free Contains Lead

72215LB15PF Overview


The TQFP package contains FIFO memory chip.Mounting it in Surface Mount is recommended.When the supply voltage is 5V there is the possibility of high efficiency.The number of terminations in FIFO means is 64 .In the case of the operation pins, they are 64 pins.FIFO design requires a maximum current of 60mA to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.A self-contained gadget is contained within FIFOs .It has a OTHER FIFO memory type IC.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.A total of 64 pins are present on the FIFO memory IC.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.During regular operation, the FIFO memory's maximum value is 66.7MHz .Normally, the component owns 5V power supplies.

72215LB15PF Features


FIFOs category
Frequency at most

72215LB15PF Applications


There are a lot of Integrated Device Technology (IDT) 72215LB15PF FIFOs Memory applications.

  • Disk Controllers
  • Communications
  • Telecommunication
  • Thermal Management for DDR3 Memory Modules
  • Game Consoles
  • SPI Bus Flash Memory Device
  • A/D output buffers
  • Event Recorder
  • Look-up Tables
  • Communications Systems

Write a review

Note: HTML is not translated!
    Bad           Good