72215LB15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72215LB15PFI Overview
FIFO memory chip is included in the TQFP package.Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains 64 terminations.There are 64 pins for operation.In order to operate FIFO design, a maximum current of 60mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.In FIFOs , there is a self-contained gadget.It has a OTHER FIFO memory type IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.It has a total of 64 pins on it.With a frequency of 66.7MHz , it exhibits good accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .A component normally has 5V power supplies attached to it.
72215LB15PFI Features
FIFOs category
Frequency at most
72215LB15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72215LB15PFI FIFOs Memory applications.
- Test Equipment
- Network bridges
- Controlled baseline
- Extended product life cycle
- General Data Collection Applications at Low-Temperatures
- Character generators
- GPS Offender Tracking
- Product traceability
- Seismic Data Collection at Extreme Temperatures
- Portable Information Devices
