72215LB15PFI8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
72215LB15PFI8 Overview
TQFP is a package that contains FIFO memory chip.Tape & Reel case is used for packaging.Surface Mount is memory IC's recommended mounting method.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 64 terminations.These are the 64 pins for operation.The maximum current required for its operation is 60mA .A voltage of 5V should be used for FIFO's maximum efficiency.Keeping the temperature at -40°C degrees Celsius ensures its reliability.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.There are a total of 64 pins on this board.With a frequency of 66.7MHz , it exhibits good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .It is normal for a component to be equipped with 5V power supplies.
72215LB15PFI8 Features
FIFOs category
Frequency at most
72215LB15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72215LB15PFI8 FIFOs Memory applications.
- Smart Meter
- SPI Bus Flash Memory Device
- General Data Collection Applications at Extreme High-Temperatures
- Game Consoles
- Industrial Systems
- Look-up Tables
- Test site
- Application that requires re-writable nonvolatile parameter memory
- Routers
- Test Equipment
