72215LB15TFI8
| Parameters | |
|---|---|
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
72215LB15TFI8 Overview
FIFO memory chip is included in the LQFP package.In this case, it is packaged in case number Tape & Reel .The recommended mounting method for this FIFO products is Surface Mount .With a supply voltage of 5V volts, high efficiency is possible.The number of terminations in FIFO means is 64 .In the case of the operation pins, they are 64 pins.In order for FIFO design to operate, a maximum current of 60mA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.Keeping the temperature at -40°C degrees Celsius ensures its reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.Low supply voltages, such as 4.5V V, may be required for operation.The memory logic's maximum supply voltage is 5.5V volts.Currently, it has 64 pins.A frequency of 66.7MHz is sufficient to maintain good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .There are normally 5V power supplies attached to the component.
72215LB15TFI8 Features
FIFOs category
Frequency at most
72215LB15TFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72215LB15TFI8 FIFOs Memory applications.
- Seismic Data Collection at Extreme Temperatures
- Wireless
- Look-up Tables
- Buses
- Signal processing
- Desktop Computers
- Video
- Cardiac Monitoring Device
- Magnetic memories
- Product traceability
