72215LB25JI
| Parameters | |
|---|---|
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 18b |
| Direction | Bidirectional |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
72215LB25JI Overview
The PLCC package contains FIFO memory chip.Mounting it in Surface Mount is recommended.An input voltage of 5V results in high efficiency.A total of 68 terminations are contained within FIFO means.FIFO design has 68 operation pins.The maximum current required for its operation is 60mA .When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.Keeping the temperature at -40°C degrees Celsius ensures its reliability.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.There is a self-contained gadget within FIFOs .The IC of the part is OTHER FIFO memory type.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 68 pins on this board.When the frequency is set to 40MHz it can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 40MHz .The component normally owns 5V power supplies.Through the use of 1 circuits, FIFO memory chip is able to achieve enhanced flexibility.
72215LB25JI Features
FIFOs category
Frequency at most
72215LB25JI Applications
There are a lot of Integrated Device Technology (IDT) 72215LB25JI FIFOs Memory applications.
- Seismic Data Collection at Extreme Temperatures
- Event Recorder
- Down-Hole Energy Drilling
- Communications
- Analog-to-digital converters
- Networking
- Programmable Logic Controller
- Signal processing
- Thermal Management for DDR3 Memory Modules
- Digital buffering
