72215LB25PF
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
72215LB25PF Overview
You will find FIFO memory chip in the TQFP package.Surface Mount is memory IC's recommended mounting method.When the supply voltage is 5V , high efficiency is possible.I found that it has 64 terminations in FIFO means.FIFO design has 64 operation pins.FIFO design requires a maximum current of 60mA to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.It is contained within FIFOs .In this part, the memory type is OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.As a result, it contains a total of 64 pins.It maintains good accuracy at a 40MHz frequency.It is recommended that the FIFO memory's maximum value be set to 40MHz .Normally, the component owns 5V power supplies.
72215LB25PF Features
FIFOs category
Frequency at most
72215LB25PF Applications
There are a lot of Integrated Device Technology (IDT) 72215LB25PF FIFOs Memory applications.
- Analog-to-digital converters
- Buses
- Consumer Systems
- Alarm System
- A/D output buffers
- Portable Information Devices
- Seismic Data Collection at Extreme Temperatures
- Networking
- Temporary storage elements
- Character generators
