72215LB25PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72215LB25PF8 Overview
The TQFP package contains FIFO memory chip.There's a Tape & Reel on the package.A Surface Mount mounting method is recommended.When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 64 terminations.64 pin is used for operation.For its operation, 60mA is the maximum current required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at a very low supply voltage, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.As a result, it contains a total of 64 pins.When the frequency is set to 40MHz it can maintain good accuracy.The memory logic's maximum value is 40MHz for regular operation.Normally, the component owns 5V power supplies.
72215LB25PF8 Features
FIFOs category
Frequency at most
72215LB25PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72215LB25PF8 FIFOs Memory applications.
- Consumer
- MP3 Interface for Automobile
- Emulators
- Buses
- Seismic Data Collection at Extreme Temperatures
- Analog-to-digital converters
- Networking
- Communications
- SPI Bus Flash Memory Devices
- PC peripheral
