72215LB25PFI
| Parameters | |
|---|---|
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
72215LB25PFI Overview
You can find FIFO memory chip in package TQFP .The recommended mounting way is Surface Mount .A supply voltage of 5V allows for high efficiency.As a result of this, FIFO means contains 64 terminations.There are 64 pins on the operation pins.The maximum current required for its operation is 60mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.The gadget is self-contained and can be found in FIFOs .There is a memory type OTHER FIFO in the IC of this part.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.As a result, it contains a total of 64 pins.With a frequency of 40MHz , it maintains good accuracy.It is recommended that the FIFO memory's maximum value be set to 40MHz .Normaly, the component is powered by 5V power supplies.
72215LB25PFI Features
FIFOs category
Frequency at most
72215LB25PFI Applications
There are a lot of Integrated Device Technology (IDT) 72215LB25PFI FIFOs Memory applications.
- Industrial Systems
- Computer Systems
- Wireless
- Battery Charger
- Alarm System
- Queues for communication systems
- IP Camera Buffer
- Digital buffering
- Telecommunication
- Portable Information Devices
