72215LB25TF
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
72215LB25TF Overview
The LQFP package contains FIFO memory chip.Surface Mount is recommended as the mounting method.An input voltage of 5V results in high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.There are 64 pins for operation.In order to operate it, it requires 60mA volts of current.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is contained within FIFOs .It has a type OTHER FIFO memory IC.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.This FIFO memory IC is equipped with 64 pins in total.When the frequency is set to 40MHz , the system can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 40MHz .The component normally owns 5V power supplies.
72215LB25TF Features
FIFOs category
Frequency at most
72215LB25TF Applications
There are a lot of Integrated Device Technology (IDT) 72215LB25TF FIFOs Memory applications.
- Data-acquisition systems
- Measurement Equipment
- Character generators
- Cameras
- Look-up Tables
- Desktop Computers
- Rate buffers
- Multi-stage synchronizer
- Industrial Systems
- Extended product-change notification
