72220L10TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 100MHz |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 1kB |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 8b |
| Density | 8 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 8b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72220L10TP Overview
FIFO memory chip is included in the PDIP package.This FIFO memory chip is packaged as a Bulk .There is a memory of 1kB on the FIFO chip that can be used to store applications and data.It is recommended that memory IC be mounted in the Through Hole direction.It is possible to achieve high efficiency with a supply voltage of 5V .A total of 28 terminations can be found in FIFO means.28 pins are the operation pins.In order for FIFO design to operate, a maximum current of 40mA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is of the type OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.The FIFO memory IC has a total of 28 pins.It is capable of maintaining good accuracy with a frequency of 100MHz .During regular operation, the FIFO memory's maximum value is 100MHz .There are normally 5V power supplies attached to the component.Using 1 circuits allows for enhanced flexibility.
72220L10TP Features
1kB memory size
FIFOs category
Frequency at most
72220L10TP Applications
There are a lot of Integrated Device Technology (IDT) 72220L10TP FIFOs Memory applications.
- Alarm System
- Communications Systems
- Programmable Logic Controller
- Computers
- Test site
- TVs
- GPS Offender Tracking
- Disk Controllers
- Measurement Equipment
- Transistors
