72221L10JG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 1.1kB |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72221L10JG Overview
PLCC is the package in which FIFO memory chip is contained.The FIFO chips have a memory of 1.1kB that can be used to store applications and data.The recommended mounting way is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.FIFO design has 32 operation pins.FIFO design requires a maximum current of 35mA to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is self-contained in FIFOs .This part has a memory type of OTHER FIFO .If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.An input voltage of 5.5V V is the maximum that FIFO memory can handle.This FIFO memory IC is equipped with 32 pins in total.When the frequency is set to 100MHz , the system can maintain good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.Normally, the component owns 5V power supplies.With the use of 1 circuits, FIFO memory chip provides enhanced flexibility.
72221L10JG Features
1.1kB memory size
FIFOs category
Frequency at most
72221L10JG Applications
There are a lot of Integrated Device Technology (IDT) 72221L10JG FIFOs Memory applications.
- Data communications
- Character generators
- Routers
- Network bridges
- IP Camera Buffer
- MP3 Interface for Automobile
- Video
- Optical memories
- Game Consoles
- Multimedia
