72221L10JG8
| Parameters | |
|---|---|
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
72221L10JG8 Overview
This package is included in PLCC .It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 5V is capable of producing high efficiency.32 terminations are contained in FIFO means.32 pins are used for operation.There is a maximum current requirement of 35mA for its operation.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.In FIFOs , this gadget is self-contained.There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at a very low supply voltage, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.It has a total of 32 pins on it.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.For regular operation, the memory logic's maximum value is 100MHz .There are normally 5V power supplies attached to the component.
72221L10JG8 Features
FIFOs category
Frequency at most
72221L10JG8 Applications
There are a lot of Integrated Device Technology (IDT) 72221L10JG8 FIFOs Memory applications.
- Buses
- Temporary storage elements
- Computers
- Cardiac Monitoring Device
- Microprogramming
- Wireless
- General Data Collection Applications at Extreme High-Temperatures
- Optical memories
- Industrial Systems
- Battery Charger
