72221L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72221L10PF8 Overview
TQFP is the package in which FIFO memory chip is contained.It is pointing in the direction of Surface Mount .A supply voltage of 5V is capable of producing high efficiency.FIFO means contains 32 terminations.FIFO design has 32 operation pins.In order to operate it, it requires 35mA volts of current.A supply voltage of 5V is recommended for FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , there is a self-contained gadget.It has a type OTHER FIFO memory IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 32 pins on this FIFO memory IC.When the frequency is set to 100MHz , the system can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .It is normal for the component to own 5V power supplies.
72221L10PF8 Features
FIFOs category
Frequency at most
72221L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72221L10PF8 FIFOs Memory applications.
- Industrial Systems
- Consumer
- Transistors
- Video
- Portable Information Devices
- Communications
- Measurement Equipment
- Data
- Extended product-change notification
- SPD for DDR3 Memory Modules
