72221L15J8
| Parameters | |
|---|---|
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.08A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
72221L15J8 Overview
You can find FIFO memory chip in the PLCC package.Mounting it Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO consists of 32 terminations, which indicates that FIFO means is empty.FIFO design has 32 operation pins.For its operation, 35mA is the maximum current required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.There is a self-contained gadget within FIFOs .It has a OTHER FIFO memory type IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.There are a total of 32 pins on this board.It maintains good accuracy at a 66.7MHz frequency.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.It is normal for a component to be equipped with 5V power supplies.
72221L15J8 Features
FIFOs category
Frequency at most
72221L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 72221L15J8 FIFOs Memory applications.
- Cardiac Monitoring Device
- Industrial Systems
- Optical memories
- Networking
- A/D output buffers
- Portable Information Devices
- Alarm System
- Communications
- Temporary storage elements
- Routers
