72221L15JGI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72221L15JGI8 Overview
This package is included in PLCC .Tape & Reel case is used for packaging.A Surface Mount mounting method is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.A total of 32 terminations can be found in FIFO means.32 pin is used for operation.FIFO design requires a maximum current of 35mA to operate.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.It is self-contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 5.5V V.Approximately 32 pins are attached to it.A frequency of 66.7MHz is capable of maintaining good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .It is normal for the component to own 5V power supplies.
72221L15JGI8 Features
FIFOs category
Frequency at most
72221L15JGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72221L15JGI8 FIFOs Memory applications.
- Optical memories
- IP Radio
- SPI Bus Flash Memory Device
- Computer Systems
- Analog-to-digital converters
- Game Controller
- Extended product-change notification
- General Data Collection Applications at Low-Temperatures
- Video
- Seismic Data Collection at Extreme Temperatures
