72221L15JI8
| Parameters | |
|---|---|
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
72221L15JI8 Overview
FIFO memory chip can be found in the PLCC package.The package comes in a case of Tape & Reel .Surface Mount is recommended as the mounting method.Supply voltages of 5V are capable of achieving high efficiency.As a result of this, FIFO means contains 32 terminations.In the case of the operation pins, they are 32 pins.In order to operate FIFO design, a maximum current of 35mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.Keeping the temperature at -40°C degrees Celsius ensures its reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.There is a self-contained gadget within FIFOs .This part has a memory type of OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.The FIFO memory IC has a total of 32 pins.When the frequency is set to 66.7MHz , the system can maintain good accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.There are normally 5V power supplies attached to the component.
72221L15JI8 Features
FIFOs category
Frequency at most
72221L15JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72221L15JI8 FIFOs Memory applications.
- Laser Receiver System
- Product traceability
- Multi-stage synchronizer
- Microprogramming
- High-speed graphics pixel buffer
- Game Consoles
- Disk Controllers
- Routers
- Emulators
- Battery Charger
