72221L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 1.1kB |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 9b |
| Density | 9 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72221L15PF Overview
The TQFP package contains FIFO memory chip.The FIFO chips have a memory of 1.1kB that can be used to store applications and data.Mounting it in Surface Mount is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.The number of terminations in FIFO means is 32 .In the case of the operation pins, they are 32 pins.FIFO design requires a maximum current of 35mA to operate.In order to maximize efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.FIFOs contains this gadget in its entirety.The IC of the part is OTHER FIFO memory type.Low supply voltages, such as 4.5V V, may be required for operation.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.Currently, it has 32 pins.In the presence of a 66.7MHz frequency, it can maintain good accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.It is normal for the component to own 5V power supplies.By using 1 circuits, FIFO memory chip has greater flexibility.
72221L15PF Features
1.1kB memory size
FIFOs category
Frequency at most
72221L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72221L15PF FIFOs Memory applications.
- IP Camera Buffer
- Firmware loaders
- Telecommunication
- Down-Hole Energy Drilling
- Cardiac Monitoring Device
- Buses
- General Data Collection Applications at Extreme High-Temperatures
- Fabrication Site
- Cameras
- Code converters
