72221L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72221L15PF8 Overview
FIFO memory chip is contained in the TQFP package.Mounting it in Surface Mount is recommended.A supply voltage of 5V allows for high efficiency.A total of 32 terminations can be found in FIFO means.The operation pins are 32 pins.FIFO design requires 35mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget is self-contained and can be found in FIFOs .In this part, the memory type is OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.There are a total of 32 pins on this FIFO memory IC.When the frequency is set to 66.7MHz , the system can maintain good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.It is normal for a component to be equipped with 5V power supplies.
72221L15PF8 Features
FIFOs category
Frequency at most
72221L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72221L15PF8 FIFOs Memory applications.
- Fabrication Site
- Seismic Data Collection at Extreme Temperatures
- High-speed disk
- Cameras
- Game Controller
- Analog-to-digital converters
- Emulators
- MP3 Interface for Automobile
- Product traceability
- Consumer Systems
