Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
32 |
Published |
2005 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.8mm |
Frequency |
66.7MHz |
Pin Count |
32 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
35mA |
Max Supply Current |
35mA |
Frequency (Max) |
66.7MHz |
Access Time |
10 ns |
Organization |
1KX9 |
Density |
9 kb |
Standby Current-Max |
0.005A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
FWFT Support |
No |
Programmable Flags Support |
Yes |
Output Enable |
YES |
Cycle Time |
15 ns |
Height Seated (Max) |
1.6mm |
Length |
7mm |
Width |
7mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72221L15PFI Overview
FIFO memory chip is included in the TQFP package.It is pointing in the direction of Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.As a result of this, FIFO means contains 32 terminations.There are 32 pins on the operation pins.The maximum current required for its operation is 35mA .In order to maximize efficiency, the supply voltage should be set to 5V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained in FIFOs .It has a type OTHER FIFO memory IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.The FIFO memory IC is equipped with a total of 32 pins.It maintains good accuracy at a 66.7MHz frequency.There is 66.7MHz FIFO memory IC's maximum value for regular operation.A component normally has 5V power supplies attached to it.
72221L15PFI Features
FIFOs category
Frequency at most
72221L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72221L15PFI FIFOs Memory applications.
- Computer Systems
- Measurement Equipment
- General Data Collection Applications at Extreme High-Temperatures
- Magnetic memories
- Networking
- Down-Hole Energy Drilling
- HDD
- Application that requires re-writable nonvolatile parameter memory
- Queues for communication systems
- Video Processing