72221L25JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72221L25JI8 Overview
PLCC is the package in which FIFO memory chip is contained.Tape & Reel case is used for packaging.Mounting it in the Surface Mount way is recommended.When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 32 terminations.There are 32 pins on the operation pins.In order for FIFO design to operate, a maximum current of 35mA is required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.This gadget is self-contained in?FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.There are a total of 32 pins on this FIFO memory IC.It maintains good accuracy at a 40MHz frequency.During normal operation, the FIFO memory's maximum value is 40MHz .Normally, the component owns 5V power supplies.
72221L25JI8 Features
FIFOs category
Frequency at most
72221L25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72221L25JI8 FIFOs Memory applications.
- Rate buffers
- Signal processing
- Computer networks
- Video Processing
- General Data Collection Applications at Extreme High-Temperatures
- Seismic Data Collection at Extreme Temperatures
- Test site
- Analog-to-digital converters
- Multimedia
- Laser Receiver System
