72221L25PFI
| Parameters | |
|---|---|
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Pin Count | 32 |
72221L25PFI Overview
You can find FIFO memory chip in package TQFP .It is pointing in the direction of Surface Mount .It is possible to achieve high efficiency with a supply voltage of 5V .In FIFO means, there are 32 terminations.There are 32 pins on the operation pins.In order for FIFO design to operate, a maximum current of 35mA is required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.Keeping the temperature at -40°C degrees Celsius ensures its reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 4.5V V, may be required for operation.An input voltage of 5.5V V is the maximum that FIFO memory can handle.This FIFO memory IC is equipped with 32 pins in total.With a frequency of 40MHz , it maintains good accuracy.During regular operation, 40MHz is the FIFO memory's maximum value.Normaly, the component is powered by 5V power supplies.
72221L25PFI Features
FIFOs category
Frequency at most
72221L25PFI Applications
There are a lot of Integrated Device Technology (IDT) 72221L25PFI FIFOs Memory applications.
- Communications
- Microprogramming
- Rate buffers
- Medical Monitoring Device
- Consumer Systems
- General Data Collection Applications at Extreme High-Temperatures
- PC peripheral
- One assembly
- GPS Offender Tracking
- Measurement Equipment
