72221L25PFI8
| Parameters | |
|---|---|
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
72221L25PFI8 Overview
TQFP is a package that contains FIFO memory chip.In this case, it is packaged in case number Tape & Reel .The recommended mounting method for this FIFO products is Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 32 terminations.The operation pins are 32 pins.In order to operate it, it requires 35mA volts of current.In order to maximize efficiency, the supply voltage should be set to 5V .This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.It is self-contained in FIFOs .The IC of the part is OTHER FIFO memory type.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 32 pins on this board.It is capable of maintaining good accuracy with a frequency of 40MHz .Normally, the FIFO memory's maximum value is 40MHz .Components normally possess 5V power supplies.
72221L25PFI8 Features
FIFOs category
Frequency at most
72221L25PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72221L25PFI8 FIFOs Memory applications.
- Controlled baseline
- HDD
- Rate buffers
- Signal processing
- Multimedia
- Disk Controllers
- SPI Bus Flash Memory Device
- Character generators
- Portable Information Devices
- Queues for communication systems
