72225LB10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72225LB10PFG Overview
FIFO memory chip can be found in the TQFP package.The recommended mounting way is Surface Mount .High efficiency is possible with a supply voltage of 5V .In FIFO means, there are 64 terminations.FIFO design has 64 operation pins.FIFO design requires 60mA amps of current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.A self-contained gadget is contained within FIFOs .This part has a memory type of OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.A total of 64 pins are present on the FIFO memory IC.A frequency of 100MHz is capable of maintaining good accuracy.The memory logic's maximum value is 100MHz for regular operation.Normally, the component owns 5V power supplies.
72225LB10PFG Features
FIFOs category
Frequency at most
72225LB10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72225LB10PFG FIFOs Memory applications.
- Routers
- Consumer Systems
- Telecommunication
- Code converters
- Microprogramming
- Buses
- One assembly
- Consumer
- General Data Collection Applications at Low-Temperatures
- Data communications
