72225LB10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX18 |
| Standby Current-Max | 0.005A |
| Memory Density | 18432 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72225LB10PFG8 Overview
This package is included in TQFP .Mounting it in Surface Mount is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.A total of 64 terminations are contained within FIFO means.64 pins are the operation pins.In order to operate FIFO design, a maximum current of 60mA is required.A 5V supply voltage will ensure FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 70°C °C is necessary for stable operation.There is a self-contained gadget within FIFOs .In this part, the memory type is OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.The FIFO memory IC has a total of 64 pins.During regular operation, the FIFO memory's maximum value is 100MHz .Normaly, the component is powered by 5V power supplies.
72225LB10PFG8 Features
FIFOs category
Frequency at most
72225LB10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72225LB10PFG8 FIFOs Memory applications.
- Down-Hole Energy Drilling
- Look-up Tables
- Measurement Equipment
- Computer networks
- Data
- Desktop Computers
- Test Equipment
- Game Consoles
- HDD
- Wireless
